BMW E34 Rear beam bush replacement, Fitting Powerflex bushes DIY.
Remove the rear seat.
Remove the seat belt latches.
Undo the 21/22mm nut and the 13mm bolts.
Using a large copper hammer hit the bolt up through the bush and remove it.
Now this is where I was lucky and had the bush removing tool, so remove the bush, in whichever way you can.
Time to fit our new bushes.
Grease the bushes up(Copper slip as supplied or your own) and slide the metal distance tube up through also.
Refit the bolt.
And the retaining plate with the 21/22mm nut and the 2 13mm bolts.
Refit the rear seat belt latches and then torque everything up and then refit your rear seat.