Good Evening all,
Not been here for some time, very busy with work and enjoying 23Mpg
Well I became bored of the silver interior trim and decided to wrap it in carbon fiber (3M di-noc, awesome stuff).
As I embarked on rebuilding the door cards and rear interior panels all was going well, till I begun to test all the electronics.
The mirrors moved up/down, left/right fine, then a few minutes later to finally adjust they stopped working and I could smell burning, I removed the switch and it seems that the white plug has scorch marks.
I removed the door cards and there is no visible sign of pinching or exposed cabling, I checked the fuse and as expected it has blown, I replaced the fuse and now the switch moves the mirror down and this is all, but again smell of burning and a bit of smoke. I have removed the switch completely just to be safe till I can get to the bottom of it. The switch has become slack too.
What are your thoughts chaps??