I have had my car off the road for several years, to cut a long story short my clutch seized. I could not push the pedal down at all.
After too much force I broke my master at the clutch pedal (the plastic eye broke). I have taken the gearbox of and examined the clutch (it was very much rusted).
I put everything back together now and replaced the slave and hose while I was add it. I did bleed the slave completely (I think) by pushing the rod in and pushing the air out, then closing the bleed screw I repeated this several times. When no more air was coming out I put the slave in place.
But I don't get pressure on the pedal still, what did I do wrong? Is there another place where I should bleed the system?