Right thought I had fixed my remote central locking but now it's not working again!
Remote central locking had not been working for a while. Installed BMW INPA with help from forum members and it showed that the remote
was working (Black circle activated when pressed remote) and that two keys were active. Also checked ZKE5 module
(Assume this is the GM5 module behind glovebox?) for errors and none were found.
Forum member then showed me how to re-sync the remotes which then fixed the problem for around a week.
Now has stopped working again. Opened up INPA and checked ZKE5 which was again ok. However the remote is now not
being recognised by the INPA when I press it.
I reckon the next step is an electrical specialist but I thought I would check to see if anyone had any other ideas/suggestions?