Hi peeps, my E39 520i cuts out intermittently at low revs (has a bit of a dead spot near the start of the accelerator sometimes) looking into it, it is probably the Inlet Cam Sensor; but I didn't want to take the chance without codes, but I have then now :-)
So if you have more experience of reading these can you confirm if I should be replacing the sensor and whether or not I need to look elsewhere too?
Here is the codes before a reset:
And here they are after a reset:
As you can see the Inlet Cam Sensor retriggered immediately so I think that is a no brainer replacement, but wondered if I should be looking at anything else too?
Any help is appreciated