This is really only for the Steve and Kevins of the board (ie, those with an e36 and easy access to some ramps/lift)
I'm after a picture of the rear brake pipes at the union by the fuel tank. I'm looking to see how close the tank sits to the original brake pipes as I have a funny feeling that the pipes I made to replace them will hit the tank
From the factory, the pipes come out of the union for about an inch and then turn up at 90 degrees. Because of the size of the pipe flaring tools, mine come out about 2.5 inches before bending upwards so i think i might have to re-do them.
Any help much appreciated